Month: June 2013

Miguel Sebastian

June 12, 2013

Only three brands have joined the Renove Plan of tires: Pirelli, GT Radial, and Nankang. Michelin, the biggest seller in Spain, remains outside. Workshops directly apply a discount of 80 euros per change of four wheels until the 4.8 million euros in aid. The Federation of Metal businessmen (FEDEME) speaks of minimum impact, complete failure and derisory aid the Ministry of industry has opened the period since this Friday to access the aid collected in the Renove Plan of tires, acceded to that only three brands: Pirelli, GT Radial, and Nankang, contributing five product ranges. As reported by this ministerial department, period of access to aid will be extended from tomorrow, June 10, until next December 15, or at the time that the 4.8 million euros with which has been endowed with this initiative are exhausted.

Requirements tyres that will benefit from the aid are those who meet the requirements of energy efficiency, noise emission and safety (wet grip) marked by the IDAE (Institute diversification and energy saving). Workshops to those who attend the users directly apply a discount of 80 euros by the change of the four wheels. Buyer will directly benefit from the discount on the purchase invoice. They may receive these supports only natural persons. Also, the vehicle must be property of the beneficiary, enrolled in Spain and current in the payment of road tax.

A maximum of 60,000 vehicles the Renove Plan of tires includes the renewal of up to a maximum of 240,000 tires, equivalent to 60,000 vehicles, the sector has considered very small, since the Spanish market’s revival of this component moves 18 million units annually. In this way, the Federation of Metal businessmen (Fedeme) has qualified the Renove Plan of tires as a complete failure to include derisory aid and has made it clear that the damage already It is made, taking into account the paralysis caused in sales following the announcement of the incentives. The Manager of Fedeme, Carlos Jacinto, explained that the sector will continue to have the same problems as until now and expected that this plan has a minimal impact, since it caused the cessation of sales of tires with the announcement and now even boasts the majority of manufacturers and ranges. I am not concerned about criticism, I love the Minister of industry, Miguel Sebastian, said criticism of the proposal relating to tyres not only not worried that she loves, since with them gets talk topic and come to the citizen. I like criticisms of tyres. And I like because it speaks of them, which is exactly what we wanted I speak, as bulbs one or two years ago. Therefore, criticisms not only don’t we are concerned about, but that we love, he said. For the Department of Miguel Sebastian, the implementation of this measure will generate energy savings estimated at 1.86 tonnes oil equivalent per year (ktep/year). Michelin, outside of the program the main manufacturer and seller of tires in Spain, Michelin, not acceded to this program on the grounds that there is no equal conditions and produces confusion among consumers, waiting for the adoption of the European labelling, that independently certify the efficiency of every tyre from November 2012. Source of the news: industry opened the period for access to aid of EUR 80 for the trade-in of tires

Industry Crusher

June 11, 2013

Hongxing opens a new pattern for crusher industry The global economic recession in 2012 brought a great impact to the Chinese market, OS, various industries should seek for a new breakthrough from the crisis, and constantly make structural adjustment and transformation in the market to enhance anti-risk capability. Recently, learned from the statistical data of road agencies in July, China s construction machinery industry sales continue to reduce, only Southwest, Northwest, South China three regions keep the good situation; then, how to find a new way out from the crisis for the construction machinery industry? With the constant development of the national infrastructure and the promotion of green production in cement industry, limestone, clay and other waste materials provide a great source for sand and gravel production, so sand making production line construction become the most promising industry, but the uneven quality of the sand and gravel production equipment also brings a lot of the cost to the customers quarry waste. While hongxing gradually come to the fore in the market with a strong talent team and technological advantages, especially jaw crusher, impact crusher, high efficiency sand making equipment are successfully exported overseas relying on their high value-added technology and large-scale production, be highly spoke in the domestic and foreign markets. It is understood that, since the establishment, Hongxing has been the only high-tech manufacture producing both host and accessories at the same time and had incomparable advantages in crusher parts production; it establish a school-enterprise cooperation with universities and receptor institute of wear-resistant materials, providing infinite technology and theory for the production of high quality wear accessories, and therefore compared with other industries, hongxing has the unique advantages and makes the service quality perfect..

Characteristics Of Spring

June 6, 2013

Spring is one of the simplest elements of the mechanism designed for the accumulation of energy. Under the influence of some of the spring changes its original form, and after unloading returns to the basic state. In operating mode, the spring may be subjected to compressive strain, tension, torsion and bending, making the springs is a specialized process that consists of several industrial and technological stages: calculation of the springs, the design of springs, spring winding (the formation of a twisted form) and hardening springs. Procedures such as replacing the springs and the springs of sale production process are not included. At the stage of the calculation of the springs is determined by its basic performance, ability to withstand the specified load. The operating mode is characterized by spring dynamic parameters such as speed and load cycles. The main tasks consist in the industry to raise the efficiency of production, its technical level and improve product quality in order to more fully ensure that all sectors of the economy with more advanced means of production – high-performance machines, equipment and devices, high-quality raw materials, and the population – those goods in wide range. Spring – part of a machine or mechanism that serves for the temporary storage of energy due to elastic deformation under the influence of the load.

Upon termination of the spring gives the stored energy and recovers its original shape. The springs are widely used in railway transportation, automotive, mechanical engineering, instrument and other industries. The springs are used in As the engine of the clock mechanism. Energy use in spring lever bolt firearms. From the quality of manufactured springs depends on the reliability and stability of the arrangements.

One of the main parameters springs are its hardness, which is the ratio of compression work to the boom. The procedure is done manually winding a spring using a specially adapted to this lathe or specialized machines for spring coiling. The basic material for the manufacture of springs is steel. In cold coiling to make extension springs and compression springs used carbon steel spring wire (GOST 9389-75). The level of material quality is characterized by the values of ultimate tensile strength, proportional limit stress and elongation.